Skip to content
IJZIsaac Johan Ziebarth

Personal project · 2022

Ball joint and mount for a security camera

fitted in 4 weeks

The ball joint and screw mount on my eufyCam 2C Pro security camera had worn out, so I designed a replacement in Fusion 360 and 3D printed it. From the first sketch to fitting it took under 4 weeks, in mid-2022.

My role
Design and print
When
Jun – Jul 2022
Tools
Fusion 360, FDM printing, Polymaker PolyMAX PLA
Files
On Printables (opens in a new tab)
Live figurecamera-mount-3d.html

The full write-up

  1. What I built
  2. Specifications
  3. Result

What I built

  • The parts are printed in Polymaker PolyMAX PLA, which I chose for its strength.
  • I converted the camera's imperial outer thread dimensions to metric so the printed part screws onto it.
  • I tightened the ball joint's groove so the camera holds its position and stops drifting.
  • I offset the inner thread by 1 mm so the parts lock tight when screwed together.

Specifications

PartsBall joint and threaded base
SizeBall joint 21 × 21 × 29 mm; base 40 × 40 × 15 mm
MaterialPolymaker PolyMAX PLA
ThreadMetric dimensions for the camera's imperial thread
FilesPublished on Printables
The printed mount holding the camera under a timber eave
The printed mount in use, July 2022.

Result

The printed mount went into use in July 2022, and the model is published on Printables for anyone with the same camera.