Skip to content
Available2027 graduate roles and internships · avionics and embedded systems · robotics and autonomy · guidance, navigation and control
IJZIsaac Johan Ziebarth

01 · Explore

Isaac Johan Ziebarth

I write software that flies, drives and finds its way. Here is a pocket-sized Theseus V running the autonomy it ran at the 2026 Australian Rover Challenge, where we placed 1st of 17: a Livox MID-360 maps, two 60° cameras find the markers, and A* plans round its own footprint. It keeps covering new sectors for as long as you watch.

booting· click the floor to set a goal

02 · Projects

Projects

Hover a card and its model moves; its real figure wakes up in the panel. Click for the full file.Tap a card to open its write-up.

Hover a project

04 · Systems, running

Two systems you can poke

Airbrake controller, on my airbrake design

scrub along the graph · drag the yellow target

After a 2.5 s lockout past burnout, the controller predicts apogee every step and opens the brakes to land on the target; on the right is my FHC-1 airbrake module from its CAD, in the 30kAB layout C airframe from our OpenRocket model, its four flaps turning on their real hinges. Illustrative drag model, not the Hera study: there, three of my four controllers hit a 2,900 m target within about 4 m RMS on 177 reachable simulated flights.

My airbrake design
FHC-1 flaps 0° · 600 m
-brakes open
-predicted apogee
-deployment
-miss at apogee

OSIRIS V0 on the logic analyser

hover a part

The buses are the real V0 netlist: the IMU on SPI1, the barometer and power monitor on I²C1, the microSD on SPI2, a UART out to a JST-PH port, and power from the XT30 through the INA228 shunt and arming key to the buck. Wire colours follow the IEC 60757 codes in the avionics wiring standard I drafted. Traffic timing is illustrative.

Top view of the OSIRIS V0 board

Parts light up green while their bus is talking. Hover a numbered part to isolate its bus.

BN chip selectWH SCKVT MOSIOG MISO / UART TXBU SDAYE SCL / UART RXRD +VBATTRDYE +3.3 VBK ground

05 · Space

Drag the launch

Pick a launch date and a flight time to Mars. Every move runs a real Lambert solve with my digital orrery's own code and redraws the transfer; the meter shows what it costs from a 200 km Earth orbit to capture at Mars. Find a cheap one and launch it.

-

-

Δv, km/s
-
launch date →↑ flight time · every transfer, from the orrery

Loading the solver...

06 · About

The engineer

Isaac Johan Ziebarth

I'm studying mechatronic engineering at UQ (BE(Hons)/ME, finishing in 2027), and I like building things that have to work outside the lab.

At UQ Space I wrote the autonomy stack and ground control station for Theseus, our rover, and the team placed 1st of 17 at the 2026 Australian Rover Challenge. On the rocket side I wrote the flight firmware for HAVOC-2, our flight computer, and built COSMOS, the ground station we run at launches.

I led the avionics team of about 25 until November 2026. As lead I set up its 4 subteams and wrote the avionics sections of the critical design review for the 2027 rover competition, along with a requirements verification matrix. I handed the lead over to make room for my research assistant role and a Master's placement in Semester 1, 2027. I've stayed on the team as an engineer, and I advise the new Lead and Deputy Lead. I'm still working on the rocket and rover ground control stations, PCB design and the Theseus VI autonomy stack.

I also work part-time as a research assistant in UQ's School of EECS, on PX4 flight-control software and modelling. The part of engineering I enjoy most is modelling: taking a real system and building a model that predicts how it will behave.

Now nominalResearch assistant

PX4 flight control and modelling, UQ School of EECS

Also nowAvionics engineer, UQ Space

Ground stations, PCBs and the Theseus VI autonomy stack

Next upGraduating Nov 2027

Open to internships and graduate roles in avionics, autonomy and GNC.

07 · Experience

Service record

  • Avionics EngineerUQ Space
    Nov 2026 – present
  • Research Assistant (part-time)School of EECS, The University of Queensland
    Sep 2026 – present
  • Lead Avionics EngineerUQ Space
    Oct 2025 – Nov 2026
  • Avionics EngineerUQ Space
    Sep 2024 – Oct 2025
  • Winter Research StudentSchool of Mechanical and Mining Engineering, UQ (Errol, the autonomous research car)
    Jun – Jul 2025
  • Casual TechnicianSustainable Minerals Institute, UQ
    Jan – Feb and Jul – Dec 2024
  • Winter Research StudentSustainable Minerals Institute, UQ
    Jun – Jul 2023

Bachelor of Engineering (Honours) and Master of Engineering, Mechatronic Engineering, The University of Queensland. Expected Nov 2027.

08 · Graduating 2027 · avionics, autonomy, GNC

Let's build the next one.